JuiceBox EV Charger
Powered by VoltiE
- Available in 32A, 40A, 48A and 80A
- Plug-in or hardwired installation
- Dual band Wi-Fi; OTA updates
- J1772 plug
- VoltiE PowerUp! mobile application
Overview
JuiceBox by VoltiE Level 2 charger delivers reliable home charging with a simple setup flow. Dual band Wi-Fi provides network connectivity and the unit receives secure over the air updates to keep features current.
The PowerUp mobile app supports schedules, usage summaries, and start or stop control. This makes it easy to align charging with off peak periods and to view estimated energy costs.
The enclosure supports indoor and outdoor installation with common wall mounting patterns. Cable length options fit typical garage layouts and the J1772 connector supports most vehicles. Tesla vehicles are supported with a commonly available adapter.
Safety features include ground fault protection, temperature monitoring, and safe start logic. These protections run continuously to help maintain a stable session.
Technical Specifications
Electrical
- Charging level
- AC Level 2, single phase
- Input voltage
- Nominal 110 to 240 V AC, 60 Hz, single phase
- Per model rating
-
JuiceBox 32 — Maximum output current 32 A; up to ~7.7 kW at 240 VJuiceBox 40 — Maximum output current 40 A; up to ~9.6 kW at 240 VJuiceBox 48 — Maximum output current 48 A; up to ~11.5 kW at 240 VJuiceBox 80 — Maximum output current 80 A; up to ~19.2 kW at 240 V
Connectivity
- Network
- Wi-Fi 802.11 b/g/n 2.4 GHz
- Updates
- Over the air firmware updates
- App
- VoltiE PowerUp for iOS and Android
Hardware
- Connector
- SAE J1772 vehicle connector; Tesla supported with adapter
- Cable
- Output cable with J1772 plug; 25 ft length typical on some variants
- Enclosure
- Weather resistant for indoor or outdoor install; typical IP66 and IK10 class
- Operating temperature
- −40 °C to +60 °C (−40 °F to +140 °F)
- Mounting
- Wall standard; pedestal options available
- Installation
- Hardwired or NEMA 14-50 plug option depending on model
Installation
- Hardwired or NEMA 14-50 plug option depending on model
- Breaker sizing: 32 A uses 40 A breaker, 40 A uses 50 A breaker, 48 A uses 60 A breaker, 80A uses 100 A breaker; apply the 80 percent rule and local code
- Confirm panel capacity and site grounding; professional installation is recommended
JuiceBox EV Charger
Powered by VoltiE
- Available in 32A, 40A, 48A and 80A
- Plug-in or hardwired installation
- Dual band Wi-Fi; OTA updates
- J1772 plug
- VoltiE PowerUp! mobile application
Overview
JuiceBox by VoltiE Level 2 charger delivers reliable home charging with a simple setup flow. Dual band Wi-Fi provides network connectivity and the unit receives secure over the air updates to keep features current.
The PowerUp mobile app supports schedules, usage summaries, and start or stop control. This makes it easy to align charging with off peak periods and to view estimated energy costs.
The enclosure supports indoor and outdoor installation with common wall mounting patterns. Cable length options fit typical garage layouts and the J1772 connector supports most vehicles. Tesla vehicles are supported with a commonly available adapter.
Safety features include ground fault protection, temperature monitoring, and safe start logic. These protections run continuously to help maintain a stable session.
Technical Specifications
Electrical
- Charging level
- AC Level 2, single phase
- Input voltage
- Nominal 110 to 240 V AC, 60 Hz, single phase
- Per model rating
-
JuiceBox 32 — Maximum output current 32 A; up to ~7.7 kW at 240 VJuiceBox 40 — Maximum output current 40 A; up to ~9.6 kW at 240 VJuiceBox 48 — Maximum output current 48 A; up to ~11.5 kW at 240 VJuiceBox 80 — Maximum output current 80 A; up to ~19.2 kW at 240 V
Connectivity
- Network
- Wi-Fi 802.11 b/g/n 2.4 GHz
- Updates
- Over the air firmware updates
- App
- VoltiE PowerUp for iOS and Android
Hardware
- Connector
- SAE J1772 vehicle connector; Tesla supported with adapter
- Cable
- Output cable with J1772 plug; 25 ft length typical on some variants
- Enclosure
- Weather resistant for indoor or outdoor install; typical IP66 and IK10 class
- Operating temperature
- −40 °C to +60 °C (−40 °F to +140 °F)
- Mounting
- Wall standard; pedestal options available
- Installation
- Hardwired or NEMA 14-50 plug option depending on model
Installation
- Hardwired or NEMA 14-50 plug option depending on model
- Breaker sizing: 32 A uses 40 A breaker, 40 A uses 50 A breaker, 48 A uses 60 A breaker, 80A uses 100 A breaker; apply the 80 percent rule and local code
- Confirm panel capacity and site grounding; professional installation is recommended