VoltiE Level 2 PowerUp! Pro
Commercial EV Chargers
- Available in 32 A, 40 A, 48 A, and 80 A
- Ethernet and Wi-Fi; OTA updates; OCPP 1.6J compatible
Overview
PowerUp! Pro chargers are the commercial Level 2 models that were previously marketed as Enel X Way JuiceBox Pro. Exterior hardware and mounting remain familiar, now managed through VoltiE services and support.
Each unit supports Ethernet and Wi-Fi connectivity, remote configuration, and over the air firmware updates. OCPP 1.6J compatibility enables integration with the VoltiE CSMS and standard third party backends.
Power options include 32 A, 40 A, 48 A, and 80 A for sites with higher throughput requirements. Access control policies can be applied by site or by user group. RFID card flows may be enabled depending on the configuration.
The enclosure is suitable for indoor and outdoor placement with accessory cable management and pedestal options for parking lots and garages.
Technical Specifications
Electrical
- Charging level
- AC Level 2, single phase
- Input voltage
- Nominal 208 to 240 V AC, 60 Hz, single phase
- Per model rating
-
PowerUp! Pro 32: Maximum output current 32 A; up to ~7.7 kW at 240 VPowerUp! Pro 40: Maximum output current 40 A; up to ~9.6 kW at 240 VPowerUp! Pro 48: Maximum output current 48 A; up to ~11.5 kW at 240 VPowerUp! Pro 80: Maximum output current 80 A; up to ~19.2 kW at 240 V
- Connector
- SAE J1772 vehicle connector; Tesla supported with adapter
- Cable
- Output cable with J1772 plug; 25 ft typical on many variants
Connectivity
- Network
- Ethernet and Wi-Fi 802.11 b/g/n 2.4 GHz
- Protocol
- OCPP 1.6J compatible
- Updates
- Over the air firmware updates
- Optional uplink
- LTE via VoltiE ConnectUp! hotspot if required
Mechanical and environment
- Enclosure
- Weather resistant for indoor or outdoor install; typical IP66 and IK10 class
- Operating temperature
- −40 °C to +60 °C (−40 °F to +140 °F)
- Mounting
- Wall standard; pedestal options available
- Access control
- Policy controlled; RFID or app-based authorization depending on configuration
Installation
- Hardwired recommended for commercial sites; NEMA 14-50 option may apply to lower current models where permitted
- Breaker sizing: Pro 32 uses 40 A breaker, Pro 40 uses 50 A breaker, Pro 48 uses 60 A breaker, Pro 80 uses 100 A breaker; apply the 80 percent rule and local code
- Confirm panel capacity, conductor sizing, and grounding; professional installation required for public sites
VoltiE Level 2 PowerUp! Pro
Commercial EV Chargers
- Available in 32 A, 40 A, 48 A, and 80 A
- Ethernet and Wi-Fi; OTA updates; OCPP 1.6J compatible
Overview
PowerUp! Pro chargers are the commercial Level 2 models that were previously marketed as Enel X Way JuiceBox Pro. Exterior hardware and mounting remain familiar, now managed through VoltiE services and support.
Each unit supports Ethernet and Wi-Fi connectivity, remote configuration, and over the air firmware updates. OCPP 1.6J compatibility enables integration with the VoltiE CSMS and standard third party backends.
Power options include 32 A, 40 A, 48 A, and 80 A for sites with higher throughput requirements. Access control policies can be applied by site or by user group. RFID card flows may be enabled depending on the configuration.
The enclosure is suitable for indoor and outdoor placement with accessory cable management and pedestal options for parking lots and garages.
Technical Specifications
Electrical
- Charging level
- AC Level 2, single phase
- Input voltage
- Nominal 208 to 240 V AC, 60 Hz, single phase
- Per model rating
-
PowerUp! Pro 32: Maximum output current 32 A; up to ~7.7 kW at 240 VPowerUp! Pro 40: Maximum output current 40 A; up to ~9.6 kW at 240 VPowerUp! Pro 48: Maximum output current 48 A; up to ~11.5 kW at 240 VPowerUp! Pro 80: Maximum output current 80 A; up to ~19.2 kW at 240 V
- Connector
- SAE J1772 vehicle connector; Tesla supported with adapter
- Cable
- Output cable with J1772 plug; 25 ft typical on many variants
Connectivity
- Network
- Ethernet and Wi-Fi 802.11 b/g/n 2.4 GHz
- Protocol
- OCPP 1.6J compatible
- Updates
- Over the air firmware updates
- Optional uplink
- LTE via VoltiE ConnectUp! hotspot if required
Mechanical and environment
- Enclosure
- Weather resistant for indoor or outdoor install; typical IP66 and IK10 class
- Operating temperature
- −40 °C to +60 °C (−40 °F to +140 °F)
- Mounting
- Wall standard; pedestal options available
- Access control
- Policy controlled; RFID or app-based authorization depending on configuration
Installation
- Hardwired recommended for commercial sites; NEMA 14-50 option may apply to lower current models where permitted
- Breaker sizing: Pro 32 uses 40 A breaker, Pro 40 uses 50 A breaker, Pro 48 uses 60 A breaker, Pro 80 uses 100 A breaker; apply the 80 percent rule and local code
- Confirm panel capacity, conductor sizing, and grounding; professional installation required for public sites