Rugged and Outdoor-Ready
Weather-protected enclosure designed for harsh outdoor sites with wide operating temperature support.
VoltiE ConnectUp! Network Bridge
Rugged outdoor LTE powered, secured Wi-Fi network. 24V passive PoE, weather-rated enclosure, encrypted traffic, and a simple web dashboard for setup and control.
Overview
ConnectUp! creates a dedicated Wi-Fi network for PowerUp! chargers using an integrated LTE backhaul. Provide power via passive PoE, scan to activate, and your chargers join a secured SSID managed by the bridge.
A built-in web dashboard lets you review signal quality, adjust network settings, and manage firmware updates without needing a separate on-site router or complex IT deployment.
Highlights
LTE Backhaul and Secured Wi-Fi
Carrier LTE uplink with 802.11 b/g/n Wi-Fi for chargers, using an isolated, secured SSID for EV equipment.
Simple to Install
24V passive PoE injector, wall or pole mounting hardware, and a streamlined dashboard for on-site setup.
Technical Specifications
| Backhaul | LTE modem (CAT-4) |
| Local network | 802.11 b/g/n Wi-Fi (secured SSID) |
| Ethernet | 10/100BASE-TX RJ-45 (PoE and management) |
| Power | 24 V passive PoE (injector included) |
| Max charger distance | ≈ 75 ft (23 m) from ConnectUp! |
| Operating temperature | −40 °F to +185 °F (−40 °C to +85 °C) |
| Enclosure | Outdoor weather-protected |
| Compliance | FCC Part 15 |
| Dashboard access | Default gateway 192.168.168.1 (change credentials on first login) |
Default setup: Wi-Fi SSID ENELX / pass Enelx12345,
dashboard 192.168.168.1, user admin / pass admin123.
Change credentials immediately.
Choose Your Configuration
- Mounting: Wall kit (BYO fasteners) or pole kit (U-bolts included).
- Backhaul: LTE primary with optional Ethernet for management.
- Power: 24 V passive PoE injector with AC adapter (indoor rated or sealed enclosure).
- Tip: Place ConnectUp! within ~75 ft (23 m) of chargers for best Wi-Fi signal.
Installation
Mount: Mount the enclosure on a wall or pole, route Ethernet through the included gland, and tighten to maintain weather protection.
Power and data: Connect Ethernet to the passive PoE injector, then plug the injector into AC power (indoors or within a sealed rated enclosure).
Dashboard: Join the default SSID or connect via injector LAN, then browse to 192.168.168.1 to set SSID, password, and timezone.
Related Software Downloads
VoltiE ConnectUp! Network Bridge
Rugged outdoor LTE powered, secured Wi-Fi network. 24V passive PoE, weather-rated enclosure, encrypted traffic, and a simple web dashboard for setup and control.
Overview
ConnectUp! creates a dedicated Wi-Fi network for PowerUp! chargers using an integrated LTE backhaul. Provide power via passive PoE, scan to activate, and your chargers join a secured SSID managed by the bridge.
A built-in web dashboard lets you review signal quality, adjust network settings, and manage firmware updates without needing a separate on-site router or complex IT deployment.
Highlights
Rugged and Outdoor-Ready
Weather-protected enclosure designed for harsh outdoor sites with wide operating temperature support.
LTE Backhaul and Secured Wi-Fi
Carrier LTE uplink with 802.11 b/g/n Wi-Fi for chargers, using an isolated, secured SSID for EV equipment.
Simple to Install
24V passive PoE injector, wall or pole mounting hardware, and a streamlined dashboard for on-site setup.
Technical Specifications
| Backhaul | LTE modem (CAT-4) |
| Local network | 802.11 b/g/n Wi-Fi (secured SSID) |
| Ethernet | 10/100BASE-TX RJ-45 (PoE and management) |
| Power | 24 V passive PoE (injector included) |
| Max charger distance | ≈ 75 ft (23 m) from ConnectUp! |
| Operating temperature | −40 °F to +185 °F (−40 °C to +85 °C) |
| Enclosure | Outdoor weather-protected |
| Compliance | FCC Part 15 |
| Dashboard access | Default gateway 192.168.168.1 (change credentials on first login) |
Default setup: Wi-Fi SSID ENELX / pass Enelx12345,
dashboard 192.168.168.1, user admin / pass admin123.
Change credentials immediately.
Choose Your Configuration
- Mounting: Wall kit (BYO fasteners) or pole kit (U-bolts included).
- Backhaul: LTE primary with optional Ethernet for management.
- Power: 24 V passive PoE injector with AC adapter (indoor rated or sealed enclosure).
- Tip: Place ConnectUp! within ~75 ft (23 m) of chargers for best Wi-Fi signal.
Installation
Mount: Mount the enclosure on a wall or pole, route Ethernet through the included gland, and tighten to maintain weather protection.
Power and data: Connect Ethernet to the passive PoE injector, then plug the injector into AC power (indoors or within a sealed rated enclosure).
Dashboard: Join the default SSID or connect via injector LAN, then browse to 192.168.168.1 to set SSID, password, and timezone.
Related Software Downloads